295050-0190 (23670-0L100) Common Rail Injector for Toyota Hilux Hiace 2KD-FTV
video
295050-0190 (23670-0L100) Common Rail Injector for Toyota Hilux Hiace 2KD-FTV

295050-0190 (23670-0L100) Common Rail Injector for Toyota Hilux Hiace 2KD-FTV

1. Product:295050-0190 (23670-0L100)
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: ABOSEDE Diesel
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

 

This 295050-0190 injector, carrying the 23670-0L100 OEM reference, is the Denso common rail unit that independent Toyota diesel specialists reach for when a 2KD-FTV or 1KD-FTV platform develops rough running, hot restart issues, or excessive return flow. Unlike catalog pages that list every possible fitment, this breakdown speaks directly to the questions workshop owners and parts counter staff actually ask before committing to a set.

 

🔧 What the bench sheet says before you bolt it in

 

The solenoid inside this injector is calibrated for multi-stage injection events-pilot, main, and post-which means rail pressure alone does not tell the whole story. A healthy unit holds stable return flow within the cylinder-to-cylinder spread your scan tool expects. When testing, compare all four bottles: a single injector returning noticeably more than its neighbors is the one to replace, not always the one the fault code points to. The nozzle geometry is G3S33 compatible, and the body accepts standard ULSD without modification.

Specification Detail
Denso Number 295050-0190
OEM Cross-Reference 23670-0L100
Injection Type Electronically controlled common rail
Control Mechanism Solenoid
Nozzle Reference G3S33
Fuel Compatibility Ultra-low-sulfur diesel (ULSD)
Typical Operating Pressure Up to 1800–2000 bar
Fitment Family Toyota 2KD-FTV / 1KD-FTV

 

🚗 Where this injector earns its keep

 

The 2KD-FTV in the Hilux VII and the Hiace commercial van is the primary host, with the 1KD-FTV appearing in regional Fortuner and Dyna chassis variants. What matters for a workshop is not the badge on the grille but the duty cycle: these engines live in stop-start delivery work, loaded highway pulls, and everything between. A batch of injectors that meters correctly at idle but leans out under load will come back as a comeback job. The 295050-0190 is built for that mixed-duty envelope, where pilot quantity stability and post-injection control directly affect DPF regeneration behavior and cold-start haze.

 

🛣️ Installation notes that separate a warranty claim from a repeat repair

 

Before the new unit goes in, the injector bore and the high-pressure connector threads need to be spotless-a lint-free swab and brake cleaner, not a shop rag. The hold-down clamp must be replaced, not reused; torque it in stages to the factory figure or the copper washer will leak combustion gas and mimic an injector fault within weeks. After priming the low-pressure side, clear the injector correction codes and run a live data session at operating temperature. If the smooth-running values stay within a narrow band across all cylinders, the repair is done. If one cylinder drifts, the problem is upstream-fuel contamination or rail pressure regulation-not the new injector.

 

💡 Why this part matters in the repair order, not the catalog

 

A failed 295050-0190 rarely fails alone. The same contaminated fuel or water ingress that killed one injector is already working on the other three. Shops that replace a single unit without checking return flow on the remaining set often see the vehicle back within a month. For a diesel parts distributor, stocking this number means understanding that the counter conversation is about matched sets and coding readiness, not just price. A batch-tested set with consistent flow characteristics reduces diagnostic time and protects the shop's labor warranty. That is the difference between moving a box and earning a repeat account.

 

❓ FAQ for injector buyers and counter staff

 

Q1: Can I install one 295050-0190 without coding it to the ECU?
A: No. The correction code on the injector body must be written into the ECM. Without coding, the ECU applies default fueling, and idle quality and emissions will suffer.

Q2: How do I tell a genuine Denso body from a counterfeit before installation?
A: Counterfeit units often share the same correction code across multiple injectors. Genuine Denso injectors carry unique, individual codes. If the box of four has identical codes, stop and verify the source.

Q3: What return flow difference is acceptable between cylinders?
A: There is no universal number. Follow the OEM specification for test duration and temperature. The practical rule: a single injector returning significantly more than the others under identical conditions is out of spec, even if the absolute volume looks low.

Q4: My customer has a hard hot-start. Is this injector the cause?
A: It is a strong candidate. Excessive return flow when warm drops rail pressure during cranking. But confirm with a return flow test and check rail pressure actual versus desired before condemning the injector.

Q5: Does this unit require a specific fuel filter micron rating?
A: Use the OEM-specified filter for the 2KD/1KD platform. After any injector replacement, replace the filter and inspect the housing for metal or water evidence. Contamination is the leading cause of repeat failure.

 

Basic Information about the Company

 

202510091606539026

 

 

2

3

4

 

Flexible Payment Methods for Your Convenience

 

To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

product-750-750

Bank Transfer

Pay directly in 15 supported currencies.

west union

Western Union

Quick and global money transfers.

PayPalLogo2014-1024x1014

PayPal

Safe and convenient online payment.

ae99cd49-2667-464e-b9db-b39cee0126e1

Alibaba

Enjoy extra protection with trusted Alibaba transactions.

We're here to make your order process worry-free - choose the payment method that works best for you!

 

Shipping Made Simple

6

Customer reviews

 

8

Hot Tags: 295050-0190 (23670-0L100) Common Rail Injector for Toyota Hilux Hiace 2KD-FTV, China 295050-0190 (23670-0L100) Common Rail Injector for Toyota Hilux Hiace 2KD-FTV manufacturers, suppliers, factory, denso injector

You Might Also Like

(0/10)

clearall