295050-0020 (23670-30190) Common Rail Injector for Toyota 1KD-FTV
video
295050-0020 (23670-30190) Common Rail Injector for Toyota 1KD-FTV

295050-0020 (23670-30190) Common Rail Injector for Toyota 1KD-FTV

1. Product:295050-0020 (23670-30190)
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: ABOSEDE Diesel
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

 

This Denso solenoid-type unit carries the 295050-0020 internal number and the Toyota 23670-30190 OEM reference. It is a brand-new, bench-tested replacement for 1KD-FTV and 2KD-FTV platforms, built for workshops and distributors who care about coding and return flow consistency more than packaging. For Hilux, Hiace, and Prado fleets, the real questions start after the first hundred kilometres.

 

🔧 What the Numbers Tell You Before You Order

 

The 295050-0020 body is calibrated for the 1KD-FTV rail pressure and stable solenoid response across the duty cycle. At the counter, the interchange footprint matters: it shares an application window with 295050-0100 and 23670-30196, but the ECU expects the specific compensation code on the unit you install. When a customer reports P0093 or a persistent rough idle after a budget replacement, the culprit is usually control valve seat wear that shifts pilot injection quantity without setting a code until long-term fuel trim drifts.

 

🚗 Where It Earns Its Keep-and Where It Doesn't

 

This injector suits Hilux (2011–2015 D-4D), Hiace vans, and Prado 120/150 units on the 1KD platform, where multi-stage pilot injection keeps cold-start combustion noise acceptable. It is not universal. A 2KD-FTV conversion or a 1KD with a swapped ECU may reject the compensation code format. Distributors should confirm the engine ECU part number before bulk orders-mechanically it matches the 295050-0100, but the calibration file expectation differs.

Verification Point What to Check Before Dispatch
OEM Cross-Reference 23670-30190 must appear on the body; do not accept 23670-0L090 without confirming the ECU calibration variant.
Return Flow Bench data should show back-leakage inside the Denso window for 1KD-FTV; high idle return signals control valve lapping failure.
Compensation Code The 5-character code on the solenoid housing must be legible and unique; duplicates across a batch flag remanufactured cores.
Nozzle Tip Under magnification, spray holes should show no EDM recast layer or honing marks from refurbishment.
Electrical Connector The 2-pin housing must click positively; loose fit causes intermittent misfire that mimics injector failure.

 

🛣️ Installation Is Where New Injectors Get Blamed for Old Problems

 

A fresh 295050-0020 will not fix a fuel system shedding metal particles from a tired high-pressure pump. Inspect the fuel filter for sparkles first-if present, the new unit will suffer the same control valve erosion within weeks. Clean the injector bore with a nylon brush, never a metal scraper; carbon on the copper washer seat lifts the nozzle and distorts the spray cone, causing smoke at full load. Use a new copper washer and new hold-down bolt (the 1KD bolt is torque-to-yield). Finally, write the compensation code with a Toyota D-4D-capable tool-skipping this leaves the ECU on the old injector map, the top reason a "new" injector feels worse than the worn one.

 

🧩 The Repair Economics Most Suppliers Won't Spell Out

 

For a diesel repair shop, stocking 295050-0020 is about comeback risk, not unit price. A 1KD-FTV leaving the bay with an uncoded or mismatched injector returns within a week with misfire or limp mode-and the injector is rarely at fault; the installation protocol is. Distributors who bundle a coding checklist and copper washer see lower warranty claim rates. For fleet accounts, adding the hold-down bolt and washer costs little against the labour of a rework on a Hilux that is off the road.

 

❓ FAQ for Diesel Repair Shops and Parts Distributors

 

Q1: A Hilux shakes at idle after replacing one injector. Why?
The compensation code was not entered, or the new unit's return flow is tighter than the three worn originals. The ECU balances by fuel quantity, not age. Check back-leakage on the remaining three-mixing new with high-return units creates an imbalance pilot injection cannot mask.

Q2: How does a distributor spot a re-cored unit sold as new?
Under a 10x loupe, genuine Denso laser-etched codes have sharp edges; remanufactured units show polished or re-stamped surfaces. Nozzle nut hex flats on new units are untouched; cores show wrench marks.

Q3: Will it work on a remapped 2KD-FTV?
It fits the 2KD bore, but the flow curve is calibrated for the 1KD injection window. A remap with higher rail pressure pushes the unit outside its validated duty cycle, shortening life, and the 2KD ECU may reject the coding.

Q4: What installation error kills these injectors fastest?
Reusing the copper washer or failing to clean the seat. A compressed washer creates a gas leak that overheats the nozzle tip, causing coking and spray distortion within thousands of kilometres. Over-torquing the hold-down bolt without a torque wrench distorts the body and alters control valve clearance.

Q5: Should I sell sets of four for high-mileage fleets?
For 1KD-FTV units past 250,000 km, yes-but only after checking the fuel pump for particle shedding. Four injectors on a failing supply pump guarantees a warranty return. Quote the set with a fuel filter and a fuel sample test to protect both the shop's reputation and your margin.

 

Basic Information about the Company

 

202510091606539026

 

 

2

3

4

 

Flexible Payment Methods for Your Convenience

 

To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

product-750-750

Bank Transfer

Pay directly in 15 supported currencies.

west union

Western Union

Quick and global money transfers.

PayPalLogo2014-1024x1014

PayPal

Safe and convenient online payment.

ae99cd49-2667-464e-b9db-b39cee0126e1

Alibaba

Enjoy extra protection with trusted Alibaba transactions.

We're here to make your order process worry-free - choose the payment method that works best for you!

 

Shipping Made Simple

6

Customer reviews

 

8

Hot Tags: 295050-0020 (23670-30190) Common Rail Injector for Toyota 1KD-FTV, China 295050-0020 (23670-30190) Common Rail Injector for Toyota 1KD-FTV manufacturers, suppliers, factory, denso injector

You Might Also Like

(0/10)

clearall