511-7975 Common Rail Fuel Injection Pump for CAT C9.3 Engines
1.Product Name:CAT FUEL PUMP
2.Model No.:511-7975
3.Origin: made-in-China
4.Weight: 8.38kg
5.Size:33*32.5*27cm
6.Application: For C9.3 Engine
7.Delivery Time: 3-5 days
8.Payment Methods:T/T,Western union,PayPal,ALIBABA,BANK.
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
This 511-7975 common rail fuel injection pump feeds the C9.3 ACERT diesel engine used across Cat loaders, excavators, and dozers. For shops handling fleet maintenance or wholesale distribution, the real questions rarely start with "what is it"-they start with whether it fits the machine on the lift, how long it survives contaminated fuel, and how to avoid a counterfeit that kills the injectors downstream.
🔧 Specifications That Matter at the Bench
The pump operates within a high-pressure common rail system reaching 1800–2000 bar, and its internal tolerances are unforgiving of debris or moisture. Cat lists dimensions of roughly 22.81 in length and 17.74 in height, with a carbon steel body. What the spec sheet does not tell you: the metering unit and plunger surfaces are finished to micron-level clearances, meaning a pump that sat on a shelf with an open port is already suspect. Confirm the part number 511-7975 is laser-etched, not stamped, before it goes near a customer engine.
🛣️ Machine Coverage Beyond the Obvious
Most buyers know this pump fits the 966L, 972L, 972M, 336FL, and D7E. Fewer realize it also crosses into 12M and 140M motor graders, 725C trucks, and PM310 cold planers. This breadth matters for wholesalers: one SKU covers mixed fleets, but the same pump body serves different engine calibration profiles. A unit pulled from a loader core may not behave identically in a grader application without verifying the ECU fuel map compatibility.
📊 Installation and Contamination Reality
| Critical Check | Why It Fails in the Field |
|---|---|
| Fuel rail pressure at cranking | Should climb toward 800 bar within seconds; slow rise points to pump wear or air ingress |
| Low-pressure circuit integrity | A pinhole in the supply line lets the pump cavitate before any code appears |
| ECU pump learn procedure | Skipping the relearn after installation causes rough idle and repeat comebacks |
| Core return condition | Water damage or missing fittings voids core credit and signals upstream fuel quality issues |
🧩 The Counterfeit Trap and Reman Economics
The most expensive pump is the cheap one that fails at 200 hours. Counterfeit units copy the casting number and packaging but use lower-grade plunger steel and inferior seal compounds; they typically lack any Caterpillar warranty coverage. For a repair shop, the liability extends beyond the part: a failing pump sheds metal debris into the rail, taking out all six injectors and turning a pump job into a full fuel system replacement. Cat Reman offers a middle path-drop-in ready with core return, priced below new, and backed by factory validation. If the customer insists on aftermarket, insist on seeing the plunger finish under light and the seal durometer before payment.
❓ FAQ for Diesel Repair Shops and Parts Wholesalers
Q1: Can I install this pump without Cat ET?
No. The ECM requires a pump learn sequence after replacement; skipping it risks limp mode and uneven rail pressure delivery.
Q2: What core condition gets rejected?
Rusted internal cavities, missing metering units, or pumps returned in a box without the original inlet fitting caps.
Q3: How do I tell a genuine 511-7975 from a fake?
Check the laser etch depth, packaging hologram, and whether the serial traces through Cat's dealer portal. Counterfeiters rarely replicate the holographic seal accurately.
Q4: Does this pump fit both C9 and C9.3?
The 511-7975 is listed for C9.3 applications; some cross-reference sources pair it with C9 engines in specific machine serial ranges-verify by EPC before ordering.
Q5: What warranty comes with a genuine unit?
Cat Limited Warranty applies; Reman units carry comparable coverage when the core is returned within the stated window.

Abosede

Customer feedback

Flexible Payment Methods for Your Convenience
To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer
Pay directly in 15 supported currencies.

Western Union
Quick and global money transfers.

PayPal
Safe and convenient online payment.

Alibaba
Enjoy extra protection with trusted Alibaba transactions.
We're here to make your order process worry-free - choose the payment method that works best for you!
Shipping Made Simple
We understand that every customer has unique shipping needs. That's why we offer:

Global Express Services
DHL, FedEx, UPS for fast and secure delivery.

Sea Freight Solutions
Affordable and efficient for bulk orders.

Flexible logistics
Prefer your own forwarder? We're happy to work with them too.
No matter the destination, we tailor the best shipping solution for you.
Hot Tags: 511-7975 Common Rail Fuel Injection Pump for CAT C9.3 Engines, China 511-7975 Common Rail Fuel Injection Pump for CAT C9.3 Engines manufacturers, suppliers, factory, cat pump
You Might Also Like
-

Caterpillar C4.4 Diesel Fuel Pump 326-4634 Reliable ...
-

CAT 3412 Fuel PUMP 235-2026 Genuine Diesel PUMP For ...
-

BOSCH F00RJ01727 High-Performance Injector Valve--Br...
-

DB4429-S328 Diesel Injection Pump for Stanadyne| Pre...
-

DLLA155P2517 Injector Nozzle 0433172517 for Bosch 04...
-

3190677 Fuel Injection Pump for CAT 324D 336D C7 C9




