3190677 Fuel Injection Pump for CAT 324D 336D C7 C9
1. Part Name: Common Rail fuel pump
2. Model number: 190677 Fuel Injection Pump
3. Warranty time: 3 months
4. Material: Iron
5. Color: silver
6. Stock: 100000pcs
7. Delivery: about one week
8. Quality: original, high quality made in china
9. Payment method: Western Union. PayPal, T/T
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
The 3190677 (319-0677) high-pressure common rail fuel pump is the pressure-generation core of the CAT C7 and C9 fuel system, supplying the rail with diesel at up to 180 MPa before the ECM commands injection. For workshops servicing 324D and 336D excavators, the decisive question is rarely "what is this part"-it is whether a replacement pump will restore rail pressure stability without transferring hidden contamination to new injectors. This page addresses the procurement concerns that actually determine a successful repair.
🔧 Fitment verification beyond the model list
The 319-0677 pump is frequently cross-referenced under 10R-8899, 254-4357, and 319-0674, but interchange numbers alone do not guarantee compatibility. CAT C7 and C9 engines span multiple fuel system generations, and a pump that physically bolts to the timing case may carry a different pump control valve calibration or cam profile suited to a different emissions tier. Before ordering, confirm the engine serial number against CAT SIS rather than relying solely on the machine model. The table below consolidates the verified applications and pressure parameters for this part.
| Parameter | Specification |
|---|---|
| Part number | 319-0677 / 319-0677 |
| Cross-reference | 10R-8899, 254-4357, 319-0674 |
| Engine compatibility | CAT C7, C9 (common rail variants) |
| Primary applications | 324D, 324D L, 324D LN, 336D, 336D L, 336D LN |
| Extended applications | 325D, 329D, 330D, 950H, 962H, AP-1055D, BG-2455D |
| System pressure (typical) | Up to 180 MPa / 26,000+ psi |
| Control interface | Electronic suction control valve / pressure control valve |
| Drive configuration | Gear-driven from front gear train |
🛣️ Application scope: where this pump earns its keep
In the field, the 319-0677 is most commonly encountered on 324D and 336D excavators working high-demand cycles-mass excavation, rock trenching, and demolition where the C7 or C9 spends extended periods above 70% load. These conditions expose a marginal pump immediately: rail pressure decays under sustained demand, the ECM logs P0087 (rail pressure too low), and the operator reports derate or hard starting when hot. Beyond excavators, the same pump family appears in 950H wheel loaders, AP-1055D asphalt pavers, and 973C track loaders, making it a stocking item for distributors serving mixed CAT fleets. The distinction that matters for a repair shop is not the machine badge but the engine serial number range-a pump validated for an early C7 may not carry the correct control valve for a later C9 installation.
🔩 Installation: the steps that prevent a comeback
The most expensive mistake in common rail pump replacement is treating the pump as an isolated component. When a 319-0677 fails internally, metallic debris from the plunger and cam assembly migrates through the high-pressure lines into the rail and injectors. Installing a new pump without flushing the fuel system and verifying injector integrity routinely results in a repeat failure within weeks. The workshop protocol should include: draining and inspecting the tank for water or rust; replacing the fuel filter and checking the lift pump supply pressure (typically 60–90 psi); flushing the high-pressure lines; and bench-testing or replacing injectors if contamination is confirmed. On the 324D and 336D, access to the pump requires removing the cooling system shroud and timing cover-allow adequate time for gear timing verification before startup, as a one-tooth error will produce immediate rail pressure faults.
💡 Repair value: when replacement beats rebuild
For a C7 or C9 owner facing a pump failure, the rebuild-versus-replace decision hinges on the control valve and plunger wear pattern. If the failure originated from contaminated fuel or water ingress, the internal damage is rarely confined to one component-the cam ring, rollers, and suction control valve typically show accelerated wear simultaneously. In these cases, a rebuilt pump assembled with mixed-wear components carries a materially shorter service life than a complete unit. A new 319-0677 becomes the rational choice when the existing pump has exceeded 8,000–10,000 hours in normal duty, or 5,500–7,000 hours in high-dust, high-heat excavation. Conversely, if the failure is purely electronic-a failed suction control valve with a clean fuel system and no metal in the rail-valve replacement alone may be viable, provided the plunger clearances are within specification.
❓ FAQ for Diesel Repair Shops & Parts Distributors
Q1: How can I tell a genuine 319-0677 from a counterfeit before installation?
A: Counterfeit pumps often copy the exterior casting and label. Check the suction control valve connector pin tension and the presence of a laser-etched serial on the pump body that matches the box label. Genuine units also include a QR or data matrix code verifiable through the manufacturer's channel. A pump with perfect external cosmetics but no traceable serial is a red flag.
Q2: Will a 319-0677 pump from a 324D work on a 336D?
A: Not automatically. While both machines use C7 or C9 engines, the pump calibration-specifically the suction control valve response curve-is matched to the engine's ECM strategy and emissions configuration. Always verify by engine serial number, not by machine model alone.
Q3: My new pump installed fine but the engine derates under load. What should I check first?
A: Verify actual versus desired rail pressure with Cat ET under load. If the new pump cannot sustain pressure, check the fuel supply pressure from the lift pump and inspect the pressure relief valve on the rail. A stuck-open relief valve will bleed pressure regardless of pump condition.
Q4: What causes a replacement 319-0677 to fail within months?
A: In the vast majority of cases, contaminated fuel or a restricted return line. Metal particles from the original pump failure remain in the rail and lines; if the system was not flushed, the new pump ingests the same debris. Always flush and replace the filter and inspect the tank.
Q5: Is there a core charge or return policy for the old pump?
A: Policies vary by supplier. For workshops building a stock, confirm whether the supplier accepts cores and under what condition-complete, undamaged, and free of external corrosion. A written core acceptance policy is a reliable indicator of a distributor that understands the remanufacturing chain.
Flexible Payment Methods for Your Convenience
To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer
Pay directly in 15 supported currencies.

Western Union
Quick and global money transfers.

PayPal
Safe and convenient online payment.

Alibaba
Enjoy extra protection with trusted Alibaba transactions.
We're here to make your order process worry-free - choose the payment method that works best for you!
Shipping Made Simple
We understand that every customer has unique shipping needs. That's why we offer:

Global Express Services
DHL, FedEx, UPS for fast and secure delivery.

Sea Freight Solutions
Affordable and efficient for bulk orders.

Flexible logistics
Prefer your own forwarder? We're happy to work with them too.
No matter the destination, we tailor the best shipping solution for you.
Hot Tags: 3190677 Fuel Injection Pump for CAT 324D 336D C7 C9, China 3190677 Fuel Injection Pump for CAT 324D 336D C7 C9 manufacturers, suppliers, factory, cat pump







