Bosch 1730800 — The Numerical Key To Scania’s 9-Liter Workhorse
1. Product:1730800
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: ABOSEDE Diesel
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
In the diesel aftermarket, few things cause more confusion than a component that answers to multiple names. Bosch 1730800 is exactly such a component - a Scania OE number that unlocks a Bosch unit injector known internally as 0 414 701 061. Add to that the alternative Scania reference 1730888 and the Bosch exchange infrastructure, and you have a component with more identities than a surveillance operative.
This multiplicity is not a design flaw - it is a testament to the injector's ubiquity across Scania's 9-liter engine platform. The 1730800 is the common thread linking Scania's P, G, R, and K-series trucks, as well as certain bus applications, all powered by the DC9 engine family. Understanding this numerical network is the first step toward ensuring you order the right part - because in the world of diesel fuel systems, a single digit out of place means a return shipment and costly downtime.
🧬 The PDE Architecture: Why This Injector Stands Apart
The 1730800 is not a common-rail injector. It belongs to Bosch's PDE (Pump-Düse-Einheit) family - the pump-nozzle unit system. In this architecture, pressurization and injection occur within a single, integrated envelope. There is no high-pressure fuel line running from a remote pump to the injector; the pumping plunger and the nozzle are one assembly, driven directly by the engine's camshaft.
This design yields distinct advantages:
No pressure losses - fuel is pressurized immediately before injection, eliminating the parasitic losses inherent in long common-rail lines
Instantaneous response - the ECU's command translates to injection with minimal propagation delay
Higher peak pressures - PDE systems can achieve injection pressures exceeding 2,000 bar, enabling the fine atomization that modern emission standards demand
The 1730800 is an electronically controlled unit injector (EUI), governed by PWM signals from the Scania EMS. A high-speed solenoid determines both the timing and duration of each injection event, adjusting fuel delivery in real time based on load, speed, temperature, and altitude.
🚛 Application Landscape: Where the 1730800 Belongs
The 1730800 is specified for Scania's DC9 engine family - a 5-cylinder, 8.9-9.0-liter powerplant that serves as the backbone of Scania's medium-duty and heavy-duty lineup.
Primary Vehicle Compatibility
| Model Series | Engine Code | Displacement | Power Output |
|---|---|---|---|
| Scania F 230 / F 270 | DC913 / DC912 | 9.0L / 8.9L | 169 kW / 198 kW |
| Scania G 230 / G 270 / G 310 | DC 9.13 / DC 9.12 / DC 9.11 | 8.9L | 169–228 kW |
| Scania P 230 / P 270 / P 310 | DC 9.19 / DC 9.20 / DC 9.21 | 8.9–9.0L | 169–231 kW |
| Scania R 230 / R 270 / R 310 | DC 9.13 / DC 9.12 / DC 9.11 | 8.9L | 169–228 kW |
| Scania K 230 / K 270 / K 310 | DC 9.19 / DC 9.20 / DSC 9.21 | 8.9–9.0L | 166–228 kW |
The production window spans approximately 2004 through 2012, covering both EURO3 and early EURO4 emission standards across Scania's 4-series and 5-series trucks.
Beyond On-Highway
The DC9 platform also powers industrial applications - including certain Doosan equipment and stationary power generation units. In these roles, where engines run continuously for extended periods, injector reliability translates directly to operational uptime.
⚙️ Technical Specifications: The Numbers Behind the Performance
| Parameter | Detail |
|---|---|
| Scania OE Number | 1730800 |
| Alternative Scania Number | 1730888 |
| Bosch New Number | 0 414 701 061 |
| Alternative Bosch Number | 0 414 701 036 |
| System Type | Unit Injector System (UIS) / PDE |
| Primary Engine Family | SCANIA DC9 (5-cylinder, 8.9–9.0L) |
| Power Range | 166–231 kW (approx. 225–310 hp) |
| Control Method | PWM via Scania EMS |
| Fuel Type | Diesel |
The injector is manufactured to Bosch's OEM standards, featuring durable internal components and advanced sealing technology designed to minimize leakage and wear.
🔧 The Workshop Reality: Diagnosis and Replacement
When Precision Fades
The 1730800, like all unit injectors, has a finite service life. Common failure indicators include:
Rough idle with visible smoke - often the earliest warning of metering degradation
Power loss under load - the unit cannot sustain required injection pressure
Increased fuel consumption - injection timing or duration has drifted from factory calibration
Diagnostic trouble codes - indicating cylinder imbalance or fuel contribution errors
Installation Protocol
Replacing the 1730800 demands strict adherence to procedure:
Depressurize the fuel system - allow a minimum of five minutes after engine shutdown
Maintain absolute cleanliness - any contamination entering the unit causes immediate failure
Use only genuine Bosch or Scania sealing components
Torque to factory specifications - the DC9's 5-cylinder configuration is particularly sensitive to imbalance
The 1730800 is a sealed, calibrated assembly. Field repair is not an option - replacement is the only path to restored performance.
The Removal Challenge
Scania unit injectors can seize in the cylinder head over time. Workshop tools such as slide hammer pullers are often required for extraction. If the unit is stuck, careful tapping with a rubber mallet on the solenoid housing may be necessary - but excessive force risks damaging both the injector and the cylinder head.
🔄 The Exchange Economy: Understanding the Remanufacturing Ecosystem
The 1730800 exists within Bosch's broader exchange program for common-rail and unit injector systems. Remanufactured units - identified by numbers such as 0414701061R - are available alongside new OEM units. These remanufactured injectors are tested to the same standards as new parts and represent a cost-effective alternative for workshops and fleets.
However, there is a critical distinction: new units (like the Bosch 0 414 701 061) carry no refundable surcharge, whereas remanufactured exchange units require the return of a serviceable core. Understanding this distinction is essential when ordering - the price you see may not be the final price if you fail to return a core.
📊 At a Glance: Bosch 1730800 Specifications
| Parameter | Detail |
|---|---|
| Scania OE Number | 1730800 |
| Alternative Scania Number | 1730888 |
| Bosch New Number | 0 414 701 061 |
| Bosch Alternative | 0 414 701 036 |
| System Type | Unit Injector System (UIS) / PDE |
| Primary Engine Family | SCANIA DC9 (5-cylinder, 8.9–9.0L) |
| Vehicle Series | Scania P, G, R, K, F-series |
| Production Window | ~2004 – 2012 |
| Control Method | PWM via Scania EMS |
| Fuel Type | Diesel |
❓ Frequently Asked Questions
Q1: How do I confirm that Bosch 1730800 is the correct injector for my Scania?
Check your existing unit for Scania number 1730800 or 1730888, or Bosch number 0 414 701 061 or 0 414 701 036. Verify that your engine is from the DC9 family (5-cylinder, 8.9–9.0L). If your Scania has a DC11, DC12, or DC16 engine, this injector is not compatible - those platforms use different unit injector variants.
Q2: I found a remanufactured injector with number 0414701061R. Is it the same as 1730800?
Yes - the 0414701061R is a remanufactured version of the same Bosch unit injector (0 414 701 061) that carries the Scania OE number 1730800. The "R" suffix indicates it is a remanufactured exchange unit, which typically requires returning a serviceable core. Always confirm the exchange terms before purchasing.
Q3: What are the early warning signs that my 1730800 needs replacement in a DC9 engine?
Watch for a rough idle that feels like a "miss" - in a 5-cylinder engine, cylinder imbalance is particularly noticeable. Excessive smoke on cold start, noticeable power loss during acceleration (especially under load), and increased fuel consumption are also indicators. If diagnostic trouble codes indicate cylinder contribution imbalance, do not delay - a failing injector in a DC9 accelerates wear on the crankshaft and main bearings.
Q4: Can I replace a single 1730800 unit, or must I replace all five injectors?
Individual replacement is possible provided the remaining four injectors are within acceptable wear limits. However, for engines with high operating hours (over 500,000 km), full-set replacement is strongly recommended. In a 5-cylinder engine, cylinder-to-cylinder balance is critical - mixing a new unit with four significantly worn counterparts creates an imbalance that the EMS can only partially compensate for.
Q5: How does the 1730800 differ from a common-rail injector in practical terms?
The 1730800 is a unit injector - it generates injection pressure internally through an integrated plunger driven by the camshaft. A common-rail injector, by contrast, receives pre-pressurized fuel from a shared rail and merely controls its release. The practical difference: the 1730800 eliminates high-pressure fuel lines, reducing potential leak points and pressure losses, but it is also more mechanically complex and requires precise camshaft timing for proper operation.




Flexible Payment Methods for Your Convenience
To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer
Supports multiple currenciesand bank payment methods.

Western Union
Quick and global money transfers.

PayPal
Safe and convenient online payment.

Alibaba
Enjoy extra protection with trusted Alibaba transactions.
We're here to make your order process worry-free - choose the payment method that works best for you!
Shipping Made Simple

Customer reviews

Hot Tags: bosch 1730800 — the numerical key to scania’s 9-liter workhorse, China bosch 1730800 — the numerical key to scania’s 9-liter workhorse manufacturers, suppliers, factory, bosch injector
You Might Also Like
-

Bosch 0445110414 Injector for Fiat Multijet & Opel C...
-

Bosch 0445110480 Injector for Ford Transit & PSA 2.2...
-

Bosch 0445110938 Common Rail Injector – Precision Fu...
-

0445110565 Diesel Injector for Peugeot Citroën 1.6 H...
-

Bosch 0445110049 Injector – Fitment, Identification ...
-

Diesel Fuel Injector 0445110738 For JAC – Compatible...





