DLLA145P2252 For HOLDEN COLORADO 2.8LTR LIWEI High Quality Common Rail Diesel Injection Nozzle
1.Model number:DLLA145P2252
2.Warranty:6 months
3.Material : Iron
4.Condition : new
5.Origin : China
6.Application : HOLDEN COLORADO 2.8LTR
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
Applicable models and engine models
DLLA145P2252 for HOLDEN COLORADO 2.8LTR LIWEI high quality common rail diesel injection nozzle is a high-pressure common rail diesel injector designed to meet the National V emission standards and above, suitable for medium and heavy-duty commercial vehicles and construction machinery. Its core compatible models and corresponding engine models are as follows:
1. FAW Jiefang series: adapted to Jiefang J7, JH6 and other models, matched with Xichai CA6DM3 series engines (2019 to present).
2. Dongfeng Commercial Vehicles: used for Dongfeng Tianlong KL and KR series heavy trucks, equipped with Dongfeng Cummins Z14 engines (2021 to present).
3. Foton Auman: adapted to Auman GTL Super Energy Edition and EST-A models, matched with Foton Cummins X12/X13 engines (2020 to present).
4. Engineering machinery field: suitable for Sany SY365/SY485 excavators, XCMG XG110 mining trucks, etc., supporting Weichai WP10/WP12 series engines (2018 to present).
The nozzle adopts multi-hole injection technology (spray hole diameter 0.10~0.12mm), optimizes the atomization effect, adapts to high compression ratio diesel engines, and is suitable for high-load scenarios such as long-distance transportation and mining operations.
Key parameters for quality inspection
To ensure the performance and reliability of DLLA145P2252, the following parameters need to be tested:
1. Resistance value:
Use a multimeter to measure the resistance of the injector solenoid coil. The standard range is 13~18Ω (20℃ environment). If the resistance value exceeds the range, it indicates that the coil is aging or short-circuited and needs to be replaced.
2. Fuel injection quantity and uniformity:
Set the standard pressure (such as 1500Bar) on a special test bench to detect the single injection quantity. The deviation must be controlled within ±3%. For example, the single injection volume standard of a Cummins X12 model is 22~28ml/1000 times.
3. Atomization effect:
Observe the fuel injection form through visualization equipment. Normally, it should be a uniform conical mist with an injection angle of 15°~30°, without scattering or dripping.
4. Sealing:
When pressurized to 200Bar, the injector should have no leakage, and the seal ring should not be deformed or damaged.
5. Dynamic response time:
The injector opening/closing response time must be ≤1.5ms to ensure that the ECU accurately controls the injection timing.
Maintenance and fault prevention
It is recommended to clean the injector every 50,000 kilometers and use ultrasonic cleaning technology to remove carbon deposits.
Check the fuel filter regularly to prevent impurities from clogging the spray hole.
If the engine has idle jitter, power reduction or fault code P0200 (abnormal injector circuit), it is necessary to detect the resistance value and power supply voltage (standard 12~14V) first.
DLLA145P2252 0445110424 HOLDEN COLORADO 2.8LTR
DLLA155P2264 for 0445110447 DEUTZDALIAN
DLLA162P2266 for 0445110442/443 GREAT WALL 4D20_2.0L-EU4
DLLA150P2272for 0445110454 JMC
DLLA140P2281 for 0445110465/466/717/718/794 JAC
DLLA146P2296 for 0445110558 DEUTZ
DLLA145P2301 for 0445110483/484 SDEC
DLLA155P2307 use in 0445110488/489
DLLA155P2312 apply for 0445110493/494/750 JAC
DLLA150P2327apply for 0445110486 YUCHAI
Applicable models
DLLA146P2296 fuel injectors are mainly used in JAC diesel-powered models, including:
1. JAC series refueling trucks (such as HFC5040GJY, HFC5140GYY), used for efficient delivery and injection of light fuel;
2. JAC Liangjian chassis models (such as sprinkler truck HFC5160GSS, oil tanker HFC5140GYY1), whose diesel engines need to be matched with high-precision common rail injectors to ensure operational stability;
3. Junling series trucks (such as Junling V5), equipped with Quanchai Q25 National VI engines, rely on high-pressure common rail systems to achieve low emissions and high power output. Such models may use this type of fuel injector to optimize fuel economy.
Core Strength

Warehouse Photo


Your doubts


Abosede Diesel

Customer feedback

Flexible Payment Methods for Your Convenience
To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer
Pay directly in 15 supported currencies.

Western Union
Quick and global money transfers.

PayPal
Safe and convenient online payment.

Alibaba
Enjoy extra protection with trusted Alibaba transactions.
We're here to make your order process worry-free - choose the payment method that works best for you!
Shipping Made Simple
We understand that every customer has unique shipping needs. That's why we offer:

Global Express Services
DHL, FedEx, UPS for fast and secure delivery.

Sea Freight Solutions
Affordable and efficient for bulk orders.

Flexible logistics
Prefer your own forwarder? We're happy to work with them too.
No matter the destination, we tailor the best shipping solution for you.
Hot Tags: dlla145p2252 for holden colorado 2.8ltr liwei high quality common rail diesel injection nozzle, China dlla145p2252 for holden colorado 2.8ltr liwei high quality common rail diesel injection nozzle manufacturers, suppliers, factory, DLLA155P1514 service 0445110249 WE01 13 H50A, DSLA140P862 for 0445110021 146, DLLA147P2444 for 0445120379 429, G3S49 for 12644527 03R 07894, G3S74, DLLA153P958 for 095000 6631 16650 2600E
You Might Also Like
-

DLLA158P844 LIWEI Brand , Common Rail High Quality N...
-

BOSCH NOZZLE DLLA 153P 2558 DLLA153P2558
-

DLLA148P800 LIWEI Brand , Common Rail High Quality N...
-

F00VX50174 Nozzle for 0445120270 OM471 Actros
-

DLLA156P2401 Nozzle for Peugeot 2.0/2.2 HDi Repair
-

DLLA160P1308 LIWEI Brand Common Rail High Quality No...



