095000-0801 Common Rail Injector for Komatsu SA6D125E Engine
1. Product:095000‑0801
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: ABOSEDE Diesel
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
This common rail injector is a direct replacement for the Denso 095000-0801 (OEM cross: 6156-11-3100) in Komatsu SAA6D125E engine applications, most notably the PC400-7 excavator and WA470-5 wheel loader. It functions as the solenoid-actuated metering element within the high-pressure common rail system, translating ECU commands into precise fuel delivery events. Each unit undergoes bench verification for return flow, delivery volume, and solenoid response before dispatch, giving repair facilities a documented baseline for installation and diagnostics.
🔧 Specifications: Hard Data to Verify Before Ordering
| Item | Specification |
|---|---|
| Denso Part Number | 095000-0801 |
| OEM Cross-Reference | 6156-11-3100 / 6156113100 |
| System Type | Common Rail (solenoid-controlled) |
| Primary Applications | Komatsu PC400-7, PC450-7 excavators; WA470-5 wheel loader |
| Engine Platform | SAA6D125E-3 / SA6D125E series |
| Nozzle Reference | DLLA142P793 |
| Test Status | Bench-tested (return flow, delivery volume, sealing) |
| Warranty Reference | 6–12 months (per supplier terms) |
Buyers should note: 095000-0800 and 0801 are physically interchangeable in many 6D125 applications, but the ECU compensation code must match the unit actually installed. Mixing part numbers without updating calibration data can cause persistent smooth-running correction drift at idle.
🛣️ Application Boundaries: What Else Beyond PC400-7
Published fitment data anchors 095000-0801 primarily to the Komatsu SAA6D125E-3 platform, covering PC400-7 and PC450-7 hydraulic excavators, along with WA470-5 wheel loaders. When a machine arrives at the shop, do not rely on "6D125" alone-verify the engine nameplate suffix (e.g., SAA6D125E-3A-7W) and the ECU part number. Different emission tiers within the same engine family use different injection strategies and compensation code formats; identical physical interfaces do not guarantee identical electronic parameters.
For variants such as WA480-5L, some listings include this injector, but confirmation should be made against the injector number removed from the machine rather than cross-model inference.
🧩 Installation Pitfalls: Three Actions That Prevent Comebacks
First, replace the high-pressure fuel line. The conical seat seal in common rail systems is single-use by design; reusing the old pipe is the leading cause of secondary leakage. Second, clean the cylinder head bore. Residual carbon prevents the copper washer from seating, allowing compression gas to enter the fuel circuit-a new injector will trigger excessive return flow codes within days. Third, run a return flow comparison after coding. When replacing a single injector, if the other five units deviate by more than ±20% from the new unit, the ECU's smooth-running correction will continue biasing toward the old injectors-this is not a defective new part, but a system that needs balancing.
💡 Common Rail Repair Logic: When to Replace, Not Just "When It Fails"
In a common rail system, injector replacement timing should be driven by data, not symptoms. Three anchors guide the decision: return flow differential, injection correction value, and cold-start rail pressure build rate. When a single cylinder's correction value persistently exceeds +3 mm³/st, or hot return flow runs 30% above adjacent cylinders, the control valve assembly is in advanced wear-even if black smoke has not yet appeared.
For machines like the PC400-7 running high-load cycles, downtime costs far more than preventive replacement. Parts wholesalers can offer repair shops a practical rule: rather than waiting for nozzle seizure to create cylinder scoring risk, intervene when return flow testing shows a widening spread. The 095000-0801 is bench-screened to exclude units with solenoid response anomalies and sealing defects, reducing the probability of "new part, immediate comeback."
❓ FAQ: What Shops and Distributors Actually Ask
Q1: How do I confirm the compensation code will be accepted by the Komatsu ECU?
A: Each injector carries an individual compensation code label. Before programming, use a diagnostic tool to read the code format (digit count and prefix) the ECU currently accepts. A mismatched code will be rejected outright-stop and contact the supplier rather than attempting to override.
Q2: Can I replace only one injector on a high-hour SAA6D125E?
A: Yes, but a return flow comparison is mandatory. If the other five units exceed the new injector's return by 1.5 times, a full set replacement is advised. In mixed condition, the ECU's smooth-running control will continue biasing toward the worn units, forcing the new injector to operate outside normal parameters.
Q3: What separates a legitimate 095000-0801 from a counterfeit?
A: Check compensation code readability and solenoid resistance consistency. Counterfeits often show blurred code labels or multiple units sharing the same code. Measure solenoid resistance with a multimeter; genuine units from the same batch should deviate within 0.3Ω. Excessive spread is grounds for rejection.
Q4: Is 095000-0801 interchangeable with 095000-0800 in the field?
A: Physical fitment is often possible, but ECU strategy may differ. Purchase by the number removed from the machine; if the original is 0800, confirm whether the supplier can pre-test and ship to 0800 specification before installing an 0801.
Q5: What bench data should accompany each unit?
A: Request hot and cold return flow, delivery linearity across rail pressures, and solenoid response time as numerical values. A "tested" claim without data does not meet traceability requirements for repair facilities.




Flexible Payment Methods for Your Convenience
To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer
Pay directly in 15 supported currencies.

Western Union
Quick and global money transfers.

PayPal
Safe and convenient online payment.

Alibaba
Enjoy extra protection with trusted Alibaba transactions.
We're here to make your order process worry-free - choose the payment method that works best for you!
Shipping Made Simple

Customer reviews

Hot Tags: 095000-0801 Common Rail Injector for Komatsu SA6D125E Engine, China 095000-0801 Common Rail Injector for Komatsu SA6D125E Engine manufacturers, suppliers, factory, denso injector
You Might Also Like
-

095000-6511 Common Rail Injector for Hino N04C & Toy...
-

095000-9800 Denso Common Rail Injector for Isuzu 4HK...
-

095000-8530 / 23670-0L070 Denso Injector for Toyota ...
-

Denso 23670-E9270 Common Rail Injector – Toyota/Hino...
-

095000-6640 Common Rail Injector Reframing Diesel In...
-

Diesel Injector 095000-6990 / 8-98011605-1 for Isuzu...





