095000-5226 Denso Common Rail Injector for HINO E13C / 700 Series
video
095000-5226 Denso Common Rail Injector for HINO E13C / 700 Series

095000-5226 Denso Common Rail Injector for HINO E13C / 700 Series

1. Product:095000‑5226
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: ABOSEDE Diesel
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

 

This injector is the solenoid-type Denso G2 unit used across HINO 700-Series trucks with the E13C engine family. It carries the primary part number 095000-5226, with OEM cross-reference 23670-E0341 and interchangeable numbers 095000-5220 / 5224 / 5225. Repair shops and fleet parts buyers source it primarily as a drop-in replacement for worn units causing excessive return flow, hot-start misfire, or rail-pressure deviation codes on high-mileage E13C platforms.

 

🔧 What the E13C Fuel System Actually Demands From This Unit

 

The E13C relies on a solenoid-controlled G2 injector with a DLLA158P834 nozzle configuration. What matters at the bench is not the marketing label but the return flow rate at idle and under load, the nozzle opening pressure consistency, and whether the solenoid resistance falls within the OEM window. Aftermarket units that pass visual inspection but fail leak-off testing will trigger P0087 or P1093 within weeks. A credible 095000-5226 replacement must arrive with a bench test sheet showing leak-off values across at least three pressure points, not just a "tested" stamp.

 

📊 Model Coverage and Cross-Reference Boundaries

 

Specification Detail
Primary Part Number 095000-5226
OEM / Cross Reference 23670-E0341, 23670-E0340, 23910-1240
Interchangeable Denso Numbers 095000-5220, 095000-5224, 095000-5225, 9709500-522
Engine Application HINO E13C (also listed for P13C, K13C in some catalogs)
Vehicle Platform HINO 700-Series heavy truck
Injector Family Denso G2 solenoid, common rail
Nozzle Reference DLLA158P834
Critical Specs Solenoid resistance, return flow rate, nozzle opening pressure

Do not assume 095000-5221 / 5222 / 5223 are interchangeable without confirming the engine calibration code. The E13C has multiple emission tiers across markets, and a unit that runs clean in one truck can cause idle hunt or black smoke in another if the flow characteristics differ.

 

🛣️ Installation Reality: What Goes Wrong in the Bay

 

The most common comeback after fitting a 095000-5226 is not injector failure - it is reused copper sealing washers and unprogrammed compensation codes. The E13C ECU uses the injector's IMA code (injector minimum advance / calibration code) to trim pilot injection quantity per cylinder. Skipping the coding step leaves the engine running on default mapping, which manifests as rough cold start and a persistent haze at idle. Additionally, the high-pressure fuel line must be replaced, not reused; the E13C's rail pressure exceeds 180 MPa, and a work-hardened line will fatigue and weep. Shops that rush the job and omit the return line torque check often see diesel in the oil within 500 km.

 

💡 Repair-or-Replace Economics for E13C Fleets

 

A HINO 700 with the E13C typically accumulates 400,000–600,000 km before injector drift becomes a fuel-efficiency problem rather than a drivability complaint. At that mileage, the nozzle seat and control valve plate are the wear points, not the solenoid. A full set of six new aftermarket 095000-5226 units costs roughly one-third of OEM dealer pricing in most export markets, but the spread in quality between suppliers is enormous. The decisive question is whether the supplier can provide a leak-off comparison against a known-good core - not a generic "100% tested" claim. Distributors who stock this number should keep at least one calibrated return flow tester on site to verify incoming batches before resale.

 

❓ FAQ for Diesel Injection Shops and Parts Wholesalers

 

Q1: Can I mix a 095000-5226 with a 095000-5220 on the same E13C engine?
A: Avoid it. Cross-references exist for catalog lookup, not for cylinder-to-cylinder mixing. Minor flow differences between production batches can trigger cylinder imbalance codes even when both numbers are listed as compatible.

Q2: What return flow reading at idle should I see on a healthy 5226?
A: Bench data varies by test standard, but a common field reference for the E13C injector is under 25 ml/min at 30 MPa rail pressure. Anything above 40 ml/min on a hot engine correlates with hard starting.

Q3: The replacement injector has no visible Denso logo. Is that a red flag?
A: Not automatically. Aftermarket G2 units often ship without OEM branding. The red flag is missing IMA code labels or a code that the diagnostic tool rejects during programming.

Q4: How many labour hours should a six-injector swap book for on a HINO 700?
A: Independent shops typically allow 4–5 hours for R&R plus coding, assuming no seized hold-down bolts. Add time for high-pressure line replacement and intake removal if the E13C's intercooler piping is in the way.

Q5: Do I need to replace all six if only one cylinder misfires?
A: On a high-mileage fleet truck, yes - or at minimum test the remaining five for return flow. A single fresh injector beside five worn units creates fuel trim divergence that the ECU cannot fully correct, and the new unit often absorbs the compensation duty and fails early.

Q6: What documentation should a supplier include with a 095000-5226 order?
A: A bench test report with leak-off values and solenoid resistance, the IMA code clearly printed on a label (not just on the box), and a written warranty that covers return flow drift - not just "no dead on arrival."

 

Basic Information about the Company

 

202510091606539026

 

 

2

3

4

 

Flexible Payment Methods for Your Convenience

 

To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

product-750-750

Bank Transfer

Pay directly in 15 supported currencies.

west union

Western Union

Quick and global money transfers.

PayPalLogo2014-1024x1014

PayPal

Safe and convenient online payment.

ae99cd49-2667-464e-b9db-b39cee0126e1

Alibaba

Enjoy extra protection with trusted Alibaba transactions.

We're here to make your order process worry-free - choose the payment method that works best for you!

 

Shipping Made Simple

6

Customer reviews

 

8

Hot Tags: 095000-5226 Denso Common Rail Injector for HINO E13C / 700 Series, China 095000-5226 Denso Common Rail Injector for HINO E13C / 700 Series manufacturers, suppliers, factory, denso injector

You Might Also Like

(0/10)

clearall