CYEFI CB6P1082P Diesel Pump – Common Rail Core For Workshop Rebuild & Direct Fit
1. Product: CB6P1082P
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: Original :ABOSEDE DIESEL
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
For a diesel repair shop, every hour a Class 8 truck sits on your bay with a low rail pressure code is an hour of lost bay revenue and an angry fleet dispatcher on the phone. The CYEFI CB6P1082P is the direct-fit answer to that specific math problem. This is not a promotional piece about features-this is about getting the high-pressure fuel pump swap done once, correctly, without a comeback, and without tying up your parts counter inventory with multiple SKUs that may or may not fit the next job.
🔧 When the Pump Fails, the Clock Starts Ticking
The CB6P1082P operates at nominal system pressures above 1,600 bar, and when internal plunger clearance opens up by even 5 microns, the rail pressure drops, the ECM derates the engine, and you are looking at a tow-in. We designed this replacement to match the original plunger diameter of 10.5 mm with H6 fitment, so you do not waste time shimming or adjusting mounting brackets. The inlet vacuum spec stays at 0.3 bar max, and the leak-back volume is held to ≤25 cc per minute-numbers that directly translate to a successful first-start on your bay, not a second tear-down.
🛣️ Inventory Strategy: One Box, Multiple Bay Applications
Stocking the CB6P1082P covers a broad sweep of commercial vehicle platforms running Bosch CP3-based architectures as well as DENSO HP3 fuel system designs. Instead of keeping three different pump castings for different model years, this single cross-referenced unit handles the majority of mid-to-late-model six-cylinder common rail powerplants found in your regular fleet accounts. That means less cash tied up on the shelf, faster turnaround for your walk-in customers, and fewer "sorry, we have to order it" conversations that send business down the road to your competitor.
📊 Critical Bench Check Data – No Guesswork
| Test Parameter | Specification | Shop Relevance |
|---|---|---|
| Operating Pressure Range | 300 – 1,600 bar | Verifies rail stability under load |
| Flow Rate @ 1,000 RPM | 450 cc / 30 sec ± 3 cc | Confirms delivery without over-fueling |
| Fuel Inlet Vacuum | 0.3 bar max | Prevents cavitation from restricted supply |
| Leak-back Volume | ≤ 25 cc / min | Indicates plunger/barrel wear condition |
| Plunger Diameter | 10.5 mm | H6 fitment ensures correct hydraulic seal |
| Drive Gear Torque Spec | 85 Nm (dry) | Prevents gear walk-off and timing shift |
🔩 Installation Pitfalls That Cost You Diagnostic Time
The biggest hidden cost in a diesel fuel injection pump replacement is not the part-it is the tow-back when the tech misses the air purge step. The CB6P1082P demands that the low-pressure circuit be fully primed using a hand primer or lift pump before cranking. Skipping this allows the plunger to run dry for the first three revolutions, and that is enough to score the barrel bore, turning a straightforward swap into a warranty claim investigation. Also, we strongly advise disconnecting the ECU harness before any arc welding on the chassis-voltage spikes travel through the fuel control circuits and will damage the internal pressure regulator, creating the same P0087 code you just replaced.
💡 Reducing Repeat Visits from Contaminated Fuel
Instead of claiming "abrasion resistance," we focus on this: the CB6P1082P features a refined inlet metering valve bore geometry that actively reduces the risk of precision orifice deformation caused by fine particulates bypassing the primary filter. In real-world shop conditions, where fuel quality varies across regional suppliers, this design choice directly lowers the frequency of return visits for pressure-related drivability complaints. Combined with a drive gear torque spec of 85 Nm and hardened cam surfaces, this pump keeps the rail pressure stable throughout the entire power band, so your customer's truck actually stays on the road long enough to justify their repair invoice.
❓ FAQ – Bulk Buying & Real-Mileage Verifications
Q1: What is your core return policy for rebuildable CB6P1082P cores?
A: We accept serviceable castings with intact mounting flanges and undamaged gear bores. Return shipping prepaid via your preferred LTL carrier; core credit issued within 5 business days of inspection.
Q2: Have these pumps been dyno-tested on actual 2016–2022 truck models?
A: Yes. Our validation batch ran 1,200 hours on a Cummins X15 test mule, plus 800 hours on a Detroit DD13, covering both highway cruise and heavy lug conditions.
Q3: How many pumps per master carton, and what is the bulk discount tier?
A: Standard case pack is 6 units per carton. Tiered pricing starts at 4+ units; contact your account manager for fleet-stocking rates.
Q4: What is the most common install error you see from shops?
A: Not replacing the high-pressure pipe seals and over-torquing the drive gear bolt. We include a torque-spec card in every box to prevent that exact mistake.
Q5: Can you share real failure mileage data from field returns?
A: Majority of premature removals occur between 180,000–220,000 miles, typically linked to contaminated fuel or a failing lift pump-not the high-pressure unit itself. We log every return with fuel sample notes.
Q6: Do you offer technical hotline support for first-time installers?
A: Yes. Our support line covers priming procedures, adaptation reset steps, and diagnostic trouble code verification for the CB6P1082P during your install.



Flexible Payment Methods for Your Convenience
To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer
Pay directly in 15 supported currencies.

Western Union
Quick and global money transfers.

PayPal
Safe and convenient online payment.

Alibaba
Enjoy extra protection with trusted Alibaba transactions.
We're here to make your order process worry-free - choose the payment method that works best for you!
Shipping Made Simple

Customer reviews

Hot Tags: cyefi cb6p1082p diesel pump – common rail core for workshop rebuild & direct fit, China cyefi cb6p1082p diesel pump – common rail core for workshop rebuild & direct fit manufacturers, suppliers, factory
You Might Also Like
-

CYEFI CB6P1082F Diesel Fuel Injection Pump – Common ...
-

CYEFI CB6H934C / VG1246080097 Diesel Injection Pump
-

CYEFI CB6H953 Diesel Pump – High-Pressure Common Rai...
-

CYEFI CB6P436 | High-Pressure Common Rail Injector F...
-

CYEFI CB6P1801 Diesel Fuel Injection Pump
-

CYEFI VG1560080020 / CB6P825 High-Pressure Common Ra...


