Fuel Injecto Control Valve 3411711 Plunger 3411711 Compatible With Cummins M11 N14 L10

Part Number	3411711
Compatibility	Cummins M11, N14, L10 Series
Type	Electro-Hydraulic Control Plunger Assembly
Application	Heavy-Duty Truck & Industrial Engine
Operating Pressure	2,000-2,500 psi
Response Time	<2ms actuation
Temperature Range	-40°C to +140°C
Expected Service Life	500,000+ cycles
Plunger diameter	6.000±0.001mm
Stroke length	4.2±0.05mm
Guide clearance	0.002-0.0035mm
Warranty	18 months unlimited mileage
Plunger	Diamond-like carbon coating (DLC) 3-5μm thickness
Housing	Micro-shot peened interior (0.2-0.3mm affected layer)
Bearing surfaces	Phosphate coating for run-in protection
Plunger	AISI 52100 bearing steel
Housing	CNC-machined 4140 alloy
Seals	Viton® fluoroelastomer

 

Fuel Injector Control Valve 3411711 & Plunger 3411711

This high-quality control valve and plunger (3411711) is designed for Cummins M11, N14, and L10 diesel engines, ensuring precise fuel injection timing and optimal engine performance. Made to meet or exceed OEM specifications, it provides reliable durability and restores injector efficiency in heavy-duty applications.
 

 

✔ Direct replacement for Cummins 3411711 control valve & plunger
✔ Ensures accurate fuel metering and combustion
✔ Compatible with M11, N14, L10 engines
✔ High-strength materials for extended service life
✔ Reduces injector wear and improves fuel economy
 

Ideal for fleet maintenance, engine rebuilds, and injector repairs, this part helps maintain peak diesel engine performance while minimizing downtime.

 

 

Precision Engineered
CNC-machined to ±0.001mm tolerance
Diamond-like carbon (DLC) coating reduces wear by 70% vs. standard components

Enhanced Durability
Hardened 52100 steel plunger (HRC 60±2) withstands 500,000+ cycles
Viton® seals resist biodiesel degradation

Performance Optimized
2ms response time matches OEM specs
Pre-calibrated to Cummins pressure curves

Easy Installation
Includes alignment shims and torque specs
QR code links to step-by-step install video
Quality Assured
100% tested on Cummins-approved rigs
18-month warranty covers all failures
 

 

Core Features
Direct replacement for OEM 3411711
Precision-machined plunger (Ra 0.1µm surface finish)
Hardened steel construction (HRC 58-62)
Integrated pressure relief channel
100% flow-tested before shipment
 

 

Engine Models
Cummins M11 (1993-2001)
Cummins N14 (1990-2001)
Cummins L10 (1985-2001)

Common Symptoms Addressed
Hard starting
Power loss under load
Fault codes: 221/231/241
Excessive smoke

 

 

Precision Engineering
Laser-measured dimensional accuracy (±0.002mm)
Dynamic flow-matched to OEM specs

Durability Enhancements
Micro-polished surfaces reduce wear
Heat-treated components prevent deformation

Cost Benefits
40% more affordable than OEM
Includes installation shim kit

 

 

Powering Reliability Since 2003
At Abosede Diesel, we specialize in high-performance fuel system components for commercial vehicles. Our 3411711 control valve exemplifies our commitment to:
Engineering Excellence
Each component undergoes 12 quality checks
Proprietary hardening process extends service life

Customer Focus
24/7 technical support hotline
Field-tested solutions for real-world conditions

Global Reach
Same-day shipping from 3 continents
Compliance with EPA/CARB regulations
"After installing Abosede's control valves, our fleet's fuel efficiency improved by 8%."

 

 

 

 

Package Includes:
Control valve assembly
Installation shims
Technical bulletin

 

 

Hydraulic Testing
500 pressure cycles (0-2,500psi)
Leakage <0.5cc/min @ 2,000psi
Flow deviation <±1.5% across ports

 

Durability Validation
50,000 cycle accelerated wear test
Post-test clearance <0.006mm
Surface roughness maintained at Ra <0.2μm

 

Environmental Simulation
Thermal shock testing (-40°C to +140°C, 50 cycles)
Salt spray resistance (200hrs per ASTM B117)
Vibration testing (15G @ 10-2000Hz)

 

Material Certifications
Steel composition verified via spectrometer analysis
Hardness testing reports included (HRC 60±2)
RoHS/REACH compliance documentation available

 

Installation Specifications
Torque Values
Body fasteners: 28±2 Nm
Hydraulic fittings: 35 Nm + 30° angle tighten

Break-in Procedure
First 30 minutes at moderate load
Recommended oil change after 50 hours

Packaging Innovations
VCI (Vapor Corrosion Inhibitor) impregnated foam
RFID tracking tag for authenticity verification
QR code linking to installation videos

 

Quality Assurance
100% dimensional inspection via CMM
Batch traceability through laser marking
Statistical process control charts available
 

 

To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

We're here to make your order process worry-free - choose the payment method that works best for you!

 

 

We understand that every customer has unique shipping needs. That's why we offer:

No matter the destination, we tailor the best shipping solution for you.