Bosch F00VC01045 Four-Port Injector Lower Valve
video
Bosch F00VC01045 Four-Port Injector Lower Valve

Bosch F00VC01045 Four-Port Injector Lower Valve

1. Product:F00VC01045
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: ABOSEDE Diesel
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

 

This lower valve assembly serves as the mechanical interface between hydraulic command and fuel delivery inside Bosch common rail injectors. When the control valve opens and pressure drops in the control chamber, the needle must lift and reseat with absolute repeatability-cycle after cycle, across millions of injection events. The F00VC01045 four-port lower valve governs that motion. It maintains needle concentricity, manages the microscopic clearance between needle and guide, and resists the thermal expansion that causes sticking and erratic spray patterns in high-mileage diesel engines. For workshops rebuilding Bosch 0445110xx series injectors, this component determines whether a repaired unit meets OE delivery specs or returns to the bay with a comeback complaint.

 

🔧 Critical Tolerances That Separate OE-Level Performance from Combacks

 

The needle guide bore on this four-port lower valve is machined to a diameter tolerance of ±2 µm, creating a running clearance of 5–7 µm at ambient temperature. That gap must permit free axial needle travel while preventing excessive bypass that elevates leakage return. The guide bore receives a honing finish of 0.1 µm Ra, reducing friction and minimizing hysteresis during pressure-driven needle response. Needle hardness sits at 58–62 HRC through nitriding, while the guide material uses a low-expansion alloy to match needle growth at operating temperature. Concentricity between needle and seat is held to ≤3 µm TIR-any deviation produces an asymmetric sealing band and eventual seat leakage. Your bench test will expose these thresholds immediately if the valve falls short.

 

🛣️ Where This Valve Earns Its Keep in the Field

 

The F00VC01045 lower valve is specified for Bosch injector families 0445110095 through 0445110171, covering a broad spread of European and Asian light-duty diesel applications. You will find it inside injectors fitted to Ford Transit, Fiat Ducato, Iveco Daily, and various Peugeot/Citroën commercial platforms running the 2.2 and 2.4 HDi/Puma engines. It also appears in certain Hyundai/Kia CRDi units and selected SsangYong applications. The common thread is combustion strategy: these engines rely on pilot and post-injection events to manage NVH and DPF regeneration. A lower valve that cannot close cleanly between closely spaced pulses will bleed pilot quantity into the main event, producing rough idle and hazy smoke.

Specification Value
Bosch Part Number F00VC01045 (F 00V C01 045)
Component Type Four-port injector lower valve / needle guide assembly
Needle Guide Clearance 5–7 µm nominal at 20°C
Clearance Stability ≤ ±1 µm variation from 20°C to 150°C
Guide Bore Finish 0.1 µm Ra
Needle Hardness 58–62 HRC (nitrided)
Concentricity (needle-to-seat) ≤ 3 µm TIR
Primary Injector Compatibility 0445110095 / 096 / 100 / 101 / 102 / 103 / 104 / 105 / 106 / 107 / 108 / 120 / 121 / 151 / 152 / 170 / 171

 

🔩 Installation Notes from the Bench

 

This is not a drop-in component for a casual injector refresh. The lower valve must be installed with the injector body clamped vertically to avoid canting the needle during insertion. Lubricate the needle guide with calibration fluid, never engine oil-the additive package in motor oil leaves deposits that alter the micro-clearance and skew delivery readings. Torque the nozzle retaining nut in stages to the Bosch specification for the specific injector variant; under-tightening allows the seat to lift under rail pressure, while over-tightening distorts the guide bore. After assembly, every unit requires bench testing for back-leakage and delivery across the full rail pressure map.

 

💡 Why Rebuilders Specify This Valve Over Generic Alternatives

 

A remanufactured injector that returns within 30 days costs more in labor, diagnostic time, and reputation than the price difference between a precision valve and a commodity part. The F00VC01045 addresses the failure mode generic valves ignore-thermal clearance drift. At 150°C, an unmatched needle-guide pair can lose 2–3 µm of clearance, causing transient needle sticking and delayed opening. The resulting injection timing error may not trigger a fault code immediately, but it degrades combustion efficiency and accelerates DPF loading. The valve either holds its geometry through heat cycles or it becomes the weak link in every injector you build.

 

 

🧪 Comprehensive Quality Control & Test Documentation

 

We don't just sell parts; we validate them. Every component we supply undergoes rigorous testing on our in-house calibration benches. We provide full test documentation for our products, ensuring you receive verifiable data rather than generic claims.

 

READY STOCK & GLOBAL SUPPLY

 

Well-stocked diesel fuel injectors, professionally packed and ready for shipment to customers worldwide.

PACKED & READY TO SHIP
PACKED & READY TO SHIP
DIESEL PARTS PACKAGING
DIESEL PARTS PACKAGING
WAREHOUSE & ORDER HANDLING
WAREHOUSE & ORDER HANDLING

 

❓ FAQ for Diesel Injection Specialists and Parts Buyers

 

Q1: Will this valve work in an injector that has already been remanufactured once?
A: It depends on the injector body condition. If the nozzle nut threads and seat face are within spec, yes. If the body has been overheated or the seat shows fretting, the new valve will not restore delivery accuracy.

Q2: How does F00VC01045 differ from the control valve on the same injector?
A: The control valve regulates pressure in the control chamber. This lower valve governs needle lift and seating. Control valve issues typically cause no-start or rail pressure faults, while a worn lower valve produces rough running, increased back-leakage, and smoke.

Q3: Can I mix this lower valve with aftermarket nozzles?
A: You can, but dimensional stack-up matters. Nozzle seat angle and guide bore alignment must match the valve's concentricity spec. We recommend pairing with nozzles from the same tolerance tier.

Q4: What is the typical service life expectation?
A: In a well-filtered system running quality diesel, the guide clearance remains within spec for 150,000–200,000 km. Contaminated fuel or excessive idling shortens that window significantly.

Q5: Do you supply this valve in bulk for rebuild lines?
A: Yes. Packaging is available in individual trays or bulk quantities for high-volume injector remanufacturers. Request the batch inspection report with your first order.

 

Basic Information about the Company

 

Abosede at the exhibition – group photo for the memories.

 

 

Global Reach

Global Reach

Global Reach

 

Flexible Payment Methods for Your Convenience

 

To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer

Bank Transfer

Pay directly in 15 supported currencies.

Western Union

Western Union

Quick and global money transfers.

PayPal

PayPal

Safe and convenient online payment.

Alibaba

Alibaba

Enjoy extra protection with trusted Alibaba transactions.

We're here to make your order process worry-free - choose the payment method that works best for you!

 

Shipping Made Simple

Shipping Made Simple

Customer reviews

 

Customer Reviews

Hot Tags: bosch f00vc01045 four-port injector lower valve, China bosch f00vc01045 four-port injector lower valve manufacturers, suppliers, factory

You Might Also Like

(0/10)

clearall