Bosch F00VC30054 Injector Solenoid Valve – The Electromagnetic Pulse That Defines Combustion
1. Product:F00VC30054
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: ABOSEDE Diesel
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
In a common rail diesel engine, the injector is the final gateway between pressurized fuel and the combustion chamber. But the injector itself doesn't think - it responds. And the component that translates the ECU's electrical command into a mechanical action is the solenoid valve.
The Bosch F00VC30054 is exactly that: a precision-wound electromagnetic solenoid that sits atop the injector, waiting for the millisecond-long pulse that will open the fuel path and unleash up to 2,000 bar of pressure into the combustion bowl. It's the component that turns an electrical signal into horsepower.
What the F00VC30054 Actually Does
The F00VC30054 is an injector solenoid valve - an electromechanical actuator that forms the upper portion of a Bosch common rail injector. When the engine's ECU determines that injection should begin, it sends a precisely timed electrical pulse to the solenoid coil. This creates a magnetic field that pulls the valve open, allowing high-pressure fuel from the rail to flow through the injector's internal passages and out through the nozzle. When the pulse ends, a spring returns the valve to its closed position, terminating injection with the same precision with which it began.
What this means in practice:
Injection timing - the solenoid determines when fuel enters the cylinder
Injection duration - the length of the electrical pulse determines how much fuel is delivered
Injection quality - the solenoid's response speed affects atomization and combustion efficiency
The F00VC30054 belongs to Bosch's 110 Series solenoid family, specifically the CRI1-13 injector generation. It is used in injectors where the control valve is integrated into the solenoid assembly - a design that Bosch has refined across millions of common rail injectors worldwide.
Technical Profile: What the Numbers Tell You
| Specification | Detail |
|---|---|
| Part Number | F00VC30054 |
| Series | 110 Series / CRI1-13 |
| Type | Injector Solenoid Valve (Control Valve) |
| Material | High-speed steel |
| Weight | Approximately 700–800g |
| Application | Common rail fuel injectors |
Cross-reference numbers for the F00VC30054 include:
| Number Type | Part Number |
|---|---|
| Bosch Injector References | 0445110070, 0445110105, 0445110106, 0445110107, 0445110108, 0445110181, 0445110189, 0445110190 |
| Bosch Exchange Numbers | 0986435045, 0986435047, 0986435053, 0986435055, 0986435158 |
| OEM Reference | 6110700587 A6110700587 A611070058738 |
The F00VC30054 is also available as part of a repair kit for injectors including 0445110009, 0445110010, and 0445110011.
Application Intelligence: Where the F00VC30054 Fits
The F00VC30054 is primarily associated with Chinese commercial vehicle applications, particularly the Beijing Foton 28 engine - a 2.8-liter four-cylinder diesel that powers light trucks and commercial vehicles across China.
Primary applications include:
Beijing Foton 28 engine - light-duty commercial vehicles
Mercedes-Benz and Dodge applications - injector 0445110189 is used in 2003 Dodge Sprinter 2500 and Mercedes-Benz vehicles
Bosch CRI1-13 injector family - a generation of common rail injectors used across multiple OEM platforms
Related injector part numbers that use the F00VC30054 solenoid:
| Injector Part Number | Application |
|---|---|
| 0445110070 | Bosch CRI injector |
| 0445110189 | Mercedes-Benz / Dodge Sprinter |
| 0445110009 | Bosch CRI injector |
| 0445110010 | Bosch CRI injector |
| 0445110011 | Bosch CRI injector |
The Solenoid's Role in the Common Rail System
The F00VC30054 operates within Bosch's common rail fuel injection system - a technology that revolutionized diesel engines by separating pressure generation from injection.
How the system works:
A high-pressure pump pressurizes fuel to up to 2,000 bar (29,000 psi)
The pressurized fuel is stored in a common rail accumulator
The ECU determines the optimal injection timing and duration based on engine operating conditions
The solenoid valve (F00VC30054) receives the electrical pulse and opens the injector
High-pressure fuel flows through the nozzle and atomizes into the combustion chamber
Why the solenoid matters:
Response time - the solenoid must open and close in milliseconds
Precision - even microscopic variation in solenoid performance affects fuel delivery
Durability - the solenoid must withstand millions of actuation cycles at extreme temperatures
When the F00VC30054 Needs Replacement
Injector solenoids are wear components. The electromagnetic coil can degrade, the valve seat can wear, and the spring tension can change over time.
Signs that the F00VC30054 needs replacement:
Rough idle - inconsistent solenoid response causes uneven fuel delivery
Loss of power - reduced solenoid performance limits fuel flow
Increased fuel consumption - inefficient injection from degraded solenoid operation
Excessive smoke - poor atomization from compromised injection control
Hard starting - insufficient fuel delivery at cranking speeds
Common failure modes:
Coil failure - the electromagnetic winding breaks or shorts
Valve seat wear - the sealing surface no longer holds pressure
Contamination - debris prevents the valve from seating properly
Spring fatigue - reduced spring tension affects closing speed
Installation Considerations
Solenoid valve replacement is typically performed as part of an injector overhaul:
The injector must be removed from the engine - solenoid replacement is not an on-engine procedure
The injector must be disassembled - the solenoid is at the top of the injector assembly
The solenoid must be torqued to specification - incorrect torque affects solenoid performance
All seals must be replaced - O-rings and seals are single-use components
The injector must be tested - after solenoid replacement, the injector must be flow-tested on a calibration bench
Critical note: Solenoid replacement is not a DIY job. The F00VC30054 requires specialized tools, a clean work environment, and access to a calibration test bench. Incorrect installation will result in poor performance, increased emissions, and potential engine damage.
FAQ – Questions That Matter to Diesel Professionals
Q1: What injectors use the F00VC30054?
It is used in Bosch injectors including 0445110070, 0445110189, 0445110009, 0445110010, and 0445110011. It's primarily associated with the Beijing Foton 28 engine and Mercedes-Benz/Dodge applications.
Q2: What are the OEM cross-reference numbers for this solenoid?
The OEM reference is 6110700587 (also listed as A6110700587 and A611070058738). Bosch exchange numbers include 0986435045, 0986435047, 0986435053, 0986435055, and 0986435158.
Q3: What are the warning signs that my solenoid needs replacement?
Common symptoms include rough idle, loss of power under load, increased fuel consumption, excessive smoke, and hard starting. These indicate that the solenoid is no longer responding with the precision required for proper injection.
Q4: Can I replace just the solenoid, or do I need the complete injector?
You can replace just the solenoid - it is a serviceable component. However, solenoid replacement requires complete injector disassembly, cleaning, inspection of all components, and recalibration on a test bench. If the injector has high hours, a complete overhaul is recommended.
Q5: What's the warranty on this solenoid valve?
This solenoid valve comes with a warranty that reflects the manufacturer's quality standards.




Flexible Payment Methods for Your Convenience
To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer
Supports multiple currenciesand bank payment methods.

Western Union
Quick and global money transfers.

PayPal
Safe and convenient online payment.

Alibaba
Enjoy extra protection with trusted Alibaba transactions.
We're here to make your order process worry-free - choose the payment method that works best for you!
Shipping Made Simple

Customer reviews

Hot Tags: bosch f00vc30054 injector solenoid valve – the electromagnetic pulse that defines combustion, China bosch f00vc30054 injector solenoid valve – the electromagnetic pulse that defines combustion manufacturers, suppliers, factory, 0445120066, Bosch CR Injectors, Diesel Control Valve, F00BC80045, F00RJ01479, Fuel Injector Valve
You Might Also Like
-

Bosch F00BC80045 Fuel Metering Valve – Precision Rai...
-

1467C45013 Fuel Pump Overflow Valve – High‑Precision...
-

85PP40-02 / 85PP4002 Bosch Rail Pressure Sensor for ...
-

F00RJ02697 (F 00R J02 697) — Bosch Injector Solenoid...
-

Bosch 0445224047 — Common-Rail Fuel Distributor Pipe...
-

0928400746 Bosch Fuel Pressure Control Valve



