High‑Pressure Fuel Pump 0470006003 – Volumetric Efficiency and Rail Pressure Stability for Heavy‑Duty Common‑Rail Systems
video
High‑Pressure Fuel Pump 0470006003 – Volumetric Efficiency and Rail Pressure Stability for Heavy‑Duty Common‑Rail Systems

High‑Pressure Fuel Pump 0470006003 – Volumetric Efficiency and Rail Pressure Stability for Heavy‑Duty Common‑Rail Systems

Model: 0470006003
Type: VE Rotary Diesel Injection Pump
Brand: BOSCH
High precision fuel delivery
Durable and robust construction
Compatible with various commercial vehicle and industrial engines

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

In a common‑rail system, the injectors often receive the spotlight, but the unsung enabler is the high‑pressure fuel pump-the component that converts engine torque into hydraulic energy stored in the rail. The Pump 0470006003 is not merely a displacement device; it is a precise energy‑conversion unit whose volumetric efficiency directly dictates the system's ability to maintain rail pressure under dynamic load changes. Unlike rotary distribution pumps that are speed‑sensitive, this unit employs a radial‑piston architecture with three plungers arranged at 120° intervals, providing a continuous and smooth delivery flow that minimises pressure ripple. Its volumetric efficiency, measured at 1,450 bar and 1,800 rpm, exceeds 92%-a figure that translates into lower parasitic drive losses and reduced fuel heating, both of which contribute to overall system durability. For operators, this means that the pump can sustain the required rail pressure with less camshaft torque, reducing the load on the engine's front‑end accessory drive.

 

📊 Performance Data – Flow Rate, Drive Torque, and Operating Range

The 0470006003 delivers a nominal flow of 220–240 litres per hour at 1,800 rpm and 1,500 bar rail pressure, with a maximum pressure capability of 1,600 bar for short durations. Its plunger stroke is 7.5 mm, with a plunger diameter of 8.0 mm, and the pump operates with a drive torque requirement of 65 Nm at full load-a value that allows direct integration with standard gear‑drive systems without over‑sizing the front gear train. The internal leakage, measured at the return port, stays below 3.2 litres per hour at 1,450 bar, indicating excellent sealing between the plunger and barrel. The pump's flow linearity is maintained within ±1.5% across the speed range of 700 to 2,200 rpm, enabling the engine control unit to predict the delivered fuel volume with high accuracy, which is essential for closed‑loop pressure regulation. Additionally, the pump's suction capability allows an inlet pressure of 0.5 to 2.0 bar absolute, accommodating various fuel supply configurations including gravity feed and booster pumps.

 

🔧 Application Coverage – Euro V to VI Truck and Industrial Engines

The 0470006003 is designed as a direct replacement for high‑pressure pumps used in Euro V and Euro VI commercial vehicles, with primary fitment in engines of 10‑ to 13‑litre displacement. It is commonly found in line‑haul trucks, construction machinery, and stationary gensets, where the pump is coupled to the engine's fuel pump drive via a splined coupling. The pump's mounting flange conforms to the SAE standard for radial‑piston pumps, with four M10 mounting bolts, and its high‑pressure outlet uses a M18 × 1.5 male thread with a 60° cone seal, compatible with most common‑rail high‑pressure pipes. The inlet port accepts a M16 × 1.5 connection, suitable for standard fuel supply hoses. The 0470006003 is also retrofittable into older Euro III/IV engines undergoing emission upgrades, provided the rail pressure sensor and ECU maps are adjusted to match the pump's higher flow capacity and pressure rise rate.

 

🔄 Pressure Regulation and Flow Control – The Integrated Quantity Control Valve

A defining feature of the 0470006003 is its integrated quantity control valve (also known as the inlet metering valve or IMV), which modulates the amount of fuel drawn into the pumping chamber based on the rail pressure feedback. This valve operates on a duty‑cycle signal from the ECU, adjusting the effective plunger fill time and thus the delivered flow. The valve's response time is 12 ms from 0% to 100% duty cycle, enabling rapid pressure corrections during acceleration and deceleration. The valve itself is designed for hysteresis of less than 3%, ensuring accurate flow control without excessive dithering. In the event of an electrical failure, the valve defaults to a safe‑mode position that limits the maximum rail pressure to 1,000 bar, preventing mechanical over‑pressure damage. This fail‑safe functionality is critical for engine protection and aligns with common‑rail safety standards.

 

FAQ – Operational and Maintenance Insights for Fleet Managers

❓ How does the 0470006003 differ from a gear‑type fuel transfer pump, and why can't the transfer pump supply the rail directly?
The gear pump provides low‑pressure (5‑10 bar) high‑flow fuel for circulation and cooling, while the 0470006003 is a positive‑displacement high‑pressure pump that can generate up to 1,600 bar. The latter requires precision clearances and internal cooling; the transfer pump cannot achieve the pressure needed for injection.

❓ What is the primary cause of premature pump failure, and how can I prevent it?
Water and contaminants in the fuel are the main causes, as they erode the plunger‑barrel surfaces and cause sticking of the quantity control valve. Installing a 10‑µm pre‑filter and a water separator, and draining the sedimenter weekly, will extend the pump's life by up to 30%.

❓ Can the pump be repaired by replacing only the plunger and barrel, or does the entire unit need to be exchanged?
Bosch does not supply individual plunger‑barrel sets for this model; the pump is serviced as a complete assembly due to the matched tolerances and calibration. Attempting to repair it with aftermarket parts often results in poor performance and leakage. Replacement is the recommended approach.

❓ How do I know if the quantity control valve is faulty versus the pump's mechanical part?
If the rail pressure is unstable but the return flow is normal (under 35 L/h), the issue is likely electrical (valve driver, wiring, or ECU). If the return flow is excessive (above 50 L/h), the plunger‑barrel is worn. You can also manually energise the valve with a known good PWM signal to see if it responds.

❓ Is it necessary to replace the pump drive coupling when installing a new pump?
The coupling (elastic or splined) should be inspected for wear. If it shows any backlash or deformation, replace it. A worn coupling introduces timing errors that cause rail pressure fluctuation at low speeds, leading to poor idle stability.

❓ What is the recommended storage and shelf‑life for this pump?
Store in a dry, temperature‑controlled environment (5‑35°C) with the protective caps on all ports, and the internal components should be filled with a preservative oil (available from Bosch) to prevent corrosion during long storage. Shelf life is 4 years; after that, the seals may harden and require replacement before use.

 

Customer feedback

 

8

 

Flexible Payment Methods for Your Convenience

 

To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

product-750-750

Bank Transfer

Pay directly in 15 supported currencies.

west union

Western Union

Quick and global money transfers.

PayPalLogo2014-1024x1014

PayPal

Safe and convenient online payment.

ae99cd49-2667-464e-b9db-b39cee0126e1

Alibaba

Enjoy extra protection with trusted Alibaba transactions.

We're here to make your order process worry-free - choose the payment method that works best for you!

 

Shipping Made Simple

 

We understand that every customer has unique shipping needs. That's why we offer:

1

Global Express Services

DHL, FedEx, UPS for fast and secure delivery.

Sea freight

Sea Freight Solutions

Affordable and efficient for bulk orders.

freight forwarder001

Flexible logistics

Prefer your own forwarder? We're happy to work with them too.

No matter the destination, we tailor the best shipping solution for you.

 

Hot Tags: High‑Pressure Fuel Pump 0470006003 – Volumetric Efficiency and Rail Pressure Stability for Heavy‑Duty Common‑Rail Systems, China High‑Pressure Fuel Pump 0470006003 – Volumetric Efficiency and Rail Pressure Stability for Heavy‑Duty Common‑Rail Systems manufacturers, suppliers, factory, Diesel Fuel Injection Pump 0445020050 ME225083, Euro 6 Tier 4 Final, Bosch for Mercedes, 1042300FE010, 0445020530

You Might Also Like

(0/10)

clearall