Bosch 0414701071 – The UIS Injector That Redefines Scania Diesel Performance
video
Bosch 0414701071 – The UIS Injector That Redefines Scania Diesel Performance

Bosch 0414701071 – The UIS Injector That Redefines Scania Diesel Performance

1. Product:0414701071
2. Compatible Equipment: Diesel Fuel Injection Systems
3. Manufacturer: Aftermarket OEM Replacement
4. Condition: Brand New, Fully Tested
5. Origin: ABOSEDE Diesel
6. Shipping period: 3-5 business days
7. Payment terms: T/T, Western Union, PayPal

  • Fast Delievery
  • Quality Assurance
  • 24/7 Customer Service
Product Introduction

When the diesel industry talks about precision fuel injection, the conversation almost invariably gravitates toward common rail systems. High-pressure pumps, accumulator rails, piezoelectric injectors - the narrative has become almost formulaic. But here's the contrarian truth that seasoned Scania operators know: not all heavy-duty excellence flows through a common rail. The Bosch 0414701071 belongs to a different breed of injection technology - the Unit Injector System (UIS) , also known as the Pump-Nozzle Unit (PDE). And for certain Scania engine platforms, this architecture doesn't just compete with common rail - it outperforms it in ways that matter where the rubber meets the road.

This is the injector that delivers injection pressures of up to 220 MPa without the complexity of a high-pressure common rail pump, accumulator, and high-pressure lines running from rail to cylinder. It's a philosophy of distributed intelligence - each cylinder gets its own integrated pumping and injection unit, mounted directly in the cylinder head and actuated by the camshaft. The result? Shorter high-pressure paths, fewer leak points, and a system architecture that has proven its mettle in millions of kilometers of heavy-haul operations across Europe, Asia, and the Americas.

 

The Bosch 0414701071: A Technical Deep Dive

 

What It Is - and What It Isn't

The Bosch 0414701071 is a high-precision unit injector engineered specifically for Scania's heavy-duty diesel engines. It is not a common rail injector. It is not a standalone nozzle. It is a self-contained pumping and injection module - each unit integrates the high-pressure pump element, the solenoid valve, and the injection nozzle into a single, precisely calibrated assembly.

This design choice has profound implications for performance, serviceability, and total cost of ownership. Unlike common rail systems where a single high-pressure pump serves all cylinders and injectors are passive recipients of pressurized fuel, the UIS architecture gives each cylinder its own independent pumping capacity. Injection timing and quantity are controlled electronically via the engine control unit (ECU) through a high-pressure solenoid valve - a system that Bosch has refined over decades of diesel engineering leadership.

Technical Specifications at a Glance

Parameter Detail
Bosch Part Number 0 414 701 071 (0414701071)
System Type Unit Injector System (UIS) / Pump-Nozzle Unit (PDE)
Maximum Injection Pressure Up to 220 MPa
Actuation Camshaft-driven (OHC engines)
Control High-pressure solenoid valve, ECU-controlled
Compatible Engine Families Scania DC9, DC11, DC12, DC13, DC16
Cross-Reference Numbers 2098522, 1734493
Generation Third-generation UIS with dual-valve control (needle movement + injection pressure)

 

Application Coverage: Where This Injector Belongs

 

The Bosch 0414701071 is not a one-size-fits-all component. It is precision-engineered for specific Scania engine configurations, and correct application matching is non-negotiable for optimal performance.

Primary Engine Coverage:

Scania DC9 Series - including DC09 071A, 072A, 073A, 076A, 077A, 078A, 080A, 083A, 084A, 085A, 086A, 087A, 089A, 74A

Scania DC11 - DC11.08

Scania DC12 Series

Scania DC13 Series - including DC13 71, DC13 74, DC13 76, DC13 79A, DC13 72, DC13 73, DC13 88, DC13 91, DC13 94A, DC13 95A

Scania DC16 Series - including DC16 093A, DC16 49A

Scania DI13 Series - DI13 70, 71, 72, 73, 74, 75, 77, 78M, 80, 81, 82, 83, 84, 85, 86, 89, 91M, 92M

Vehicle Platform Compatibility:

The 0414701071 is designed for Scania's P, G, R, T, L, and S series trucks and tractors. Whether you're running a P-series distribution truck, a G-series construction hauler, or an R-series long-haul flagship, this injector is engineered to match the duty cycle and performance demands of your operation.

 

Performance DNA: Why UIS Still Matters in 2026

 

1. Pressure Where It Counts

Common rail systems have made tremendous strides in injection pressure, but the UIS architecture of the Bosch 0414701071 achieves up to 220 MPa - a figure that remains competitive with many modern common rail systems. The difference lies in where that pressure is generated. In a UIS system, pressure is built inside the injector itself, at the point of injection. This eliminates pressure losses associated with long high-pressure lines and ensures that the energy delivered to the fuel is the energy that reaches the combustion chamber.

2. Simplified System Architecture

Fewer components mean fewer failure points. The 0414701071 eliminates the need for:

A high-pressure common rail pump

High-pressure accumulator rails

High-pressure fuel lines from pump to injectors

Complex rail pressure sensors and regulators

This simplicity translates to lower parasitic losses, reduced maintenance complexity, and greater robustness in demanding operating conditions.

3. Third-Generation Solenoid Control

The 0414701071 represents Bosch's third-generation UIS technology, featuring dual-valve control - one valve regulates injector needle movement, while the other manages injection pressure. This allows for precise shaping of the injection rate, enabling multiple injection events per cycle (pilot, main, post) that optimize combustion efficiency, reduce noise, and lower emissions.

4. Euro 6 Compliance

The 0414701071 is fully compatible with Scania Euro 6 engine platforms. This means it meets the stringent emissions standards that govern heavy-duty commercial vehicles in Europe and increasingly in other global markets. For fleet operators, this is not just a regulatory checkbox - it's a guarantee that your vehicles remain compliant, operational, and profitable.

 

Quality Assurance: Genuine vs. Remanufactured

 

The Bosch 0414701071 is available in both new genuine and remanufactured configurations. Both options have their place in the market, and understanding the distinction is critical for procurement decisions.

New Genuine Injectors:

Factory-fresh components with zero service history

Full Bosch warranty coverage

Ideal for critical applications where maximum service life is required

Remanufactured Injectors:

Subject to a complete refurbishment process: disassembly, cleaning, replacement of all worn parts, adjustment, and testing on precision measuring stations

Restored to factory-spec performance parameters

Typically offered with warranties (e.g., 6–24 months)

Significantly lower cost than new units

Environmentally responsible - reduces waste and raw material consumption

Reputable suppliers perform leak testing, pressure calibration, and spray pattern verification on every remanufactured unit before it leaves the workshop.

 

Why Fleet Managers Choose the Bosch 0414701071

 

Cost Efficiency: The UIS architecture eliminates the need for expensive common rail components, reducing both upfront procurement costs and long-term maintenance expenses.

Proven Reliability: Bosch has been supplying injection systems to Scania for decades. The 0414701071 is built on engineering knowledge accumulated over millions of injector units in service.

Global Availability: Bosch's distribution network ensures that replacement injectors are available wherever Scania trucks operate - from European motorways to African mining roads.

Serviceability: UIS injectors are accessible directly in the cylinder head, simplifying removal and replacement compared to common rail systems that require high-pressure line disconnection and rail depressurization.

 

Frequently Asked Questions

 

Q1: Is the Bosch 0414701071 compatible with common rail Scania engines?
No. The 0414701071 is a Unit Injector System (UIS) component, designed for Scania engines that use the pump-nozzle unit architecture. It is not interchangeable with common rail injectors. Always verify your engine's injection system type before purchasing.

Q2: How do I know if my Scania engine requires the 0414701071?
Check your engine code. The 0414701071 is compatible with Scania DC9, DC11, DC12, DC13, and DC16 series engines, including numerous sub-variants. Cross-reference your existing injector part number or consult your Scania dealer for confirmation.

Q3: Can I install a remanufactured 0414701071 instead of a new one?
Yes. Remanufactured units undergo complete refurbishment - disassembly, cleaning, parts replacement, adjustment, and testing - to restore factory parameters. They offer significant cost savings while maintaining high performance, and reputable suppliers provide warranties of 6–24 months.

Q4: What symptoms indicate a failing 0414701071 injector?
Common indicators include uneven engine operation or speed fluctuations, power loss under load, increased fuel consumption, black or dark exhaust smoke, and diagnostic fault codes related to the injection system. Prompt replacement prevents cascading damage to other engine components.

 

 

 

 

 

 

1.jpeg

2

3

4

 

Flexible Payment Methods for Your Convenience

 

To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

product-754-754

Bank Transfer

Supports multiple currenciesand bank payment methods.

west union

Western Union

Quick and global money transfers.

PayPalLogo2014-1024x1014

PayPal

Safe and convenient online payment.

ae99cd49-2667-464e-b9db-b39cee0126e1

Alibaba

Enjoy extra protection with trusted Alibaba transactions.

We're here to make your order process worry-free - choose the payment method that works best for you!

 

Shipping Made Simple

6

Customer reviews

 

8

Hot Tags: bosch 0414701071 – the uis injector that redefines scania diesel performance, China bosch 0414701071 – the uis injector that redefines scania diesel performance manufacturers, suppliers, factory, bosch injector

You Might Also Like

(0/10)

clearall