00U218/U218 Plunger for Weifu Inline Pumps – What Shops Ask Before Buying
1.Product Name: ABOSEDE Plunger
2.Model Numbers: 2U218 Plunger
3.Brand: ABOSEDE DIESEL
4.Material: Heat-treated alloy steel with anti-corrosion coating
5.Condition: 100% Brand New
6.Shipping Time: Worldwide delivery within 5–7 business days
7.Payment Methods: T/T, PayPal, Western Union
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
The 00U218/U218 is a Weifu precision plunger-and-barrel element for inline diesel injection pumps. It is the part a rebuilder reaches for when a pump delivers unevenly across cylinders, when cold-start rack response becomes sluggish, or when the bench test shows leakage climbing past the 1.0 cm³/min threshold. What follows is not another specification sheet. It is the set of questions that actually surface when a repair shop or parts wholesaler evaluates whether this element belongs in their next pump rebuild.
📊 What the bore and stroke tell you before you order
The U218 element runs a 9.0 mm nominal diameter against an 8.5 mm stroke, sweeping 541 mm³ per plunger stroke. The control helix sits at 21° ± 0.15°, and the matched clearance between plunger and barrel is held to 3.2–3.6 µm at 20°C. These are not marketing figures-they are the tolerances that determine whether a rebuilt pump can hold 460–485 mm³ per stroke at full rack and 1,200 rpm with unit-to-unit variation inside ±1.6%. A shop measuring a used core should compare the barrel bore roundness against these values before assuming a replacement element alone will restore metering. If the bore is already oval beyond the clearance band, a new plunger will scuff within hours.
| Parameter | Value |
|---|---|
| Nominal diameter | 9.0 mm |
| Stroke | 8.5 mm |
| Swept volume | 541 mm³ |
| Control helix angle | 21° ± 0.15° |
| Matched clearance | 3.2–3.6 µm at 20°C |
| Static flow at 1,200 rpm | 460–485 mm³/stroke |
| Internal leakage limit | ≤1.0 cm³/min at 100 bar |
| Core hardness | 58–62 HRC |
🔧 Which inline pumps and engines this element actually fits
The U218 is built for MW and P-type inline pumps serving 6- and 8-cylinder engines in the 8.0 to 15.0 litre displacement band. In practice, that means the element turns up in Weichai, Yuchai, and FAW heavy-duty platforms, as well as mining haulage, marine auxiliary, and stationary generator sets where fuel quality varies and load swings are constant. A common mistake at the counter is treating "U218 compatible" as a blanket answer. The same pump family can use different element codes depending on the governor configuration and rack travel. Before quoting, confirm the pump tag and the original element stamp-not just the engine model. Distributors who skip this step absorb return freight on elements that were never going to seal correctly in a mismatched barrel.
🛣️ Installation faults that kill a new plunger before its first oil change
The most frequent cause of premature U218 failure is not the element itself-it is bore condition and assembly contamination. A new plunger dropped into a barrel with residual scoring from the previous failure will lose its clearance within the first hundred operating hours. Shops should measure barrel roundness and check for vertical scratches before fitting. Assembly must happen in a clean bench environment; a single abrasive particle above 15 µm can bridge the clearance and initiate scuffing. The retaining nut torque is 52–56 Nm-over-torquing distorts the barrel and changes the hydraulic clearance. After installation, a bench flow test at multiple rack positions is non-negotiable. A pump that flows correctly at full rack but leaks at idle will produce a hunting idle and poor cold-start response, even though the element "tests fine" on a single-point check.
🧩 Why this element is a repair decision, not a parts-catalog lookup
For a repair shop, the U218 decision comes down to whether the pump housing and camshaft are worth saving. A full pump replacement carries a lead time and cost that many fleet operators cannot absorb mid-season. A targeted plunger-and-barrel change, paired with a fresh delivery valve and seals, restores metering accuracy for a fraction of that outlay-provided the bore and cam lobes pass inspection. Wholesalers should position the U218 not as a generic "replacement part" but as a controlled repair option for Weifu inline pumps that still have serviceable cores. The element's value is highest when the buyer understands the inspection gate: measure first, replace second. Shops that adopt this sequence report fewer comebacks and more predictable bench results than those who order the element as a first response to any delivery complaint.
❓ FAQ for Diesel Repair Shops and Parts Distributors
Q1: How can I tell a genuine Weifu U218 from a re-marked copy before installation?
A: Check the helix angle under magnification-copies often deviate beyond 21° ± 0.15°. Also verify the surface finish on the plunger head; genuine elements show uniform lapping marks, not polishing swirls.
Q2: Can I replace only the plunger and keep the original barrel?
A: Only if the barrel bore passes roundness inspection and shows no vertical scoring. A new plunger in a worn barrel will leak above the 1.0 cm³/min limit within weeks.
Q3: What symptoms tell a driver the U218 element is failing, before a bench test?
A: Uneven cylinder contribution at idle, cold-start hesitation that improves after warm-up, and black smoke under load that does not trace to injectors or turbo.
Q4: Does the U218 work in both MW and P-type pumps without modification?
A: The element is used across both configurations, but the rack setting and delivery valve pairing differ. Confirm the pump tag before assuming cross-compatibility.
Q5: What is the realistic service life of a U218 in a mining or construction fleet?
A: With clean fuel and filter discipline, shops report 4,000+ hours before leakage approaches the limit. Dusty environments shorten that interval-inspect at 2,000-hour increments.
Basic Information about the Company




Flexible Payment Methods for Your Convenience
To make your purchasing experience smooth and easy, we offer a variety of secure payment options:

Bank Transfer
Pay directly in 15 supported currencies.

Western Union
Quick and global money transfers.

PayPal
Safe and convenient online payment.

Alibaba
Enjoy extra protection with trusted Alibaba transactions.
We're here to make your order process worry-free - choose the payment method that works best for you!
Shipping Made Simple

Customer reviews

Hot Tags: 00U218/U218 Plunger for Weifu Inline Pumps – What Shops Ask Before Buying, China 00U218/U218 Plunger for Weifu Inline Pumps – What Shops Ask Before Buying manufacturers, suppliers, factory, abosede accessories
You Might Also Like
-

P597 Plunger 2418455597 Longkou Original for Euro-2 ...
-

1110010013 Bosch Diesel Fuel Pressure Relief Valve f...
-

U461 Plunger For Cummins 6CT T230‑20 Engine
-

U449 Diesel Plunger 41026106 – High‑Pressure Surface...
-

U162 Original Weifu Fuel Pump Plunger Element XY95PL...
-

Denso Repair Kit 295700-4410 For ISUZU NKR 4JJ1



